Removing and installing/replacing left turn indicator insert
Necessary preliminary tasks:
- Partially detach FRONT WHEEL ARCH COVER (FRONT SECTION) .
NOTE:
Headlight shown removed for purposes of clarity.
Detach ventilation (1).
Unfasten screws (2).
Tightening torque 63 11 5AZ .
Pull turn indicator insert (3) out of headlight.
Unlock and disconnect plug connections (1) at turn indicator insert (2).
Installation note:
The seal (3) must not be damaged or missing.
Ensure gasket (3) is fitted correctly.
Replacement:
Teach in turn indicator insert with vehicle diagnosis.
- Service functions
- Body
- Lights
- Initialize the headlight driver module and teach in LEDs in headlight