Removing and installing/replacing control unit for Top-/Rear-/Side-View Camera

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks:

Unlock all plug connections and disconnect.

Unlock latch mechanisms (1).

Remove control unit (2) from holder (3) downwards.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Guide (1) on control unit (2) must be correctly inserted in corresponding recess on counter support.

Make sure control unit (2) is securely seated.

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: