Removing and installing (replacing) reversing camera

Necessary preliminary tasks: 

• Remove BUTTON FOR TAILGATE ACTIVATION .

Unclip rear view camera (1) left and right and feed out of button holders (2).

Unlock associated plug connection and disconnect.

Installation note: 

Seal (3) of rear view camera (1) must not be damaged and must be installed.

Courtesy of BMW OF NORTH AMERICA, INC.

Insert rear view camera (2) as shown in button holder (1).

Engage rear view camera (2) in direction of arrow in button holder (1).

Latch mechanisms (3) must not be damaged.

Installation note: 

Make sure the rear view camera is latched correctly (2)!

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out VEHICLE PROGRAMMING/CODING .