Removing and installing/replacing front right sensor (US version only)

Necessary preliminary tasks: 

• Disconnect BATTERY EARTH LEAD .
• Remove FRONT WHEEL ARCH COVER ON RIGHT .

Version with auxiliary oil cooler 

• Partially remove auxiliary oil cooler

Courtesy of BMW OF NORTH AMERICA, INC.

Release expansion rivet (1).

Remove air duct (2) in direction of arrow.

Installation note: 

Make sure air duct (2) is correctly fitted in recess (3).

Unfasten plug connection (3) and disconnect.

Release screw (2).

Tightening torque 65 77 2AZ .

Remove sensor (1).

Installation note: 

Make sure sensor (1) is in correct installation position.

Courtesy of BMW OF NORTH AMERICA, INC.