Removing and installing/replacing front left sensor (US version only)

Necessary preliminary tasks: 

• Disconnect BATTERY EARTH LEAD .
• Remove FRONT LEFT WHEEL ARCH COVER

Version with external radiator 

• Remove external radiator partially

Release expansion rivet (1).

Remove air duct (2) in direction of arrow.

Installation note: 

Make sure air duct (2) is correctly fitted in recess (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (3) and disconnect.

Release screw (2).

Tightening torque 65 77 2AZ .

Remove sensor (1).

Installation note: 

Make sure sensor (1) is in correct installation position.

Courtesy of BMW OF NORTH AMERICA, INC.