Removing and installing/replacing steering wheel module (M sports steering wheel)

Necessary preliminary tasks:

Release screws (1) on steering wheel.

Release screw (2) on rear side of steering wheel.

Remove design cover.

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Release steering wheel module (2) from bracket.

Release underlying plug connector (3) from bracket and disconnect.

Remove steering wheel module (2).

Installation note:

Make sure cables are correctly routed.

Make sure the plug connections (1; 3) are correctly locked.

Make sure steering wheel module (2) and plug connection (3) are correctly seated in bracket.

Courtesy of BMW OF NORTH AMERICA, INC.