2211 Engine Mounting
2211 ENGINE MOUNTING - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Engine mount to front axle support | F01/F02/F03/F04/F06/F07/F10/F10HY/F11/F12/F13/F18/F20/F21/F22/F23/F25 N57/F30/F30 HY/F31/F32/F33/F34/F35/F36/F80/F82/F83/F87/F18PHEV/F30 PHEV | M8 8.8 | 19 Nm | |
| F25/F26 | M8X45 | 28 Nm | ||
| F15/F16/F26/F25/F85/F86/F15PHEV | M10X30 | 38 Nm | ||
| 2AZ Engine mount to engine support arm | F01/F02/F03/F04/F06/F07/F10/F10HY/F11/F12/F13/F18/F80/F82/F83/F18 PHEV | M12 10.9 | 100 Nm | |
| F15 F16 N57 (right engine mount)/F25/F30 N57 (right engine mount) | M12 10.9 | 100 Nm | ||
| F20/F21/F22/F23/F25/F30 (without N57)/F32/F33/F34/F36/F80/F82/F83/F87 | M10 | 56 Nm | ||
| F25, F30 N57 (left engine mount) | M10 | 56 Nm | ||
| F25/F26 | M12 | 66 Nm | ||
| F30, F31 N47T/F30 HY | M10 | 55 Nm | ||
| F35 | M10 | 55 Nm | ||
| F15, F16N57 (left engine mount)/F15, F16N63/F15, F16N55/F15 PHEV/F85/F86 | M12 | 68 Nm | ||
| 3AZ Engine support arm to engine | F01/F02/F03/F04/F06/F07/F10/F10HY/F11/F12/F13/F15, F16N63/F18/F20/F21/F22/F23/F25/F26/F30/F31/F32/F33 N47/F34/F35/F36/F80/F82/F83/F85/F86/F18PHEV/F30 PHEV | M108.8 | 38 Nm | |
| F01 N54/F02 N54/F07N55/F10N55/F11 N55/F15, F16N55/F20 N55/F21 N55/F22 N55/F23N55/F25N55/F26N55/F30N55/F30 HY/F34 N55/F33N55/F80/F82/F83/F87 | M12 8.8 | 66 Nm | ||
| F01/F02/F10.F11, F18 N52T, F10/F11, N53/F25 N52T | M12x46 | Replace screws, jointing torque and angle of rotation must be observed without fail.
|
34 Nm 90° | |
| F20N13/F30N13/F31 N13 | M 10x70, M10x35 | 56 Nm | ||
| F15 B47/F15, F16 N57/F15 PHEV/(right engine support arm) | M10 10.9 | 56 Nm | ||
| F15 B47/F15, F16 N57/F15 PHEV/(left engine support arm) | M108.8 | 38 Nm | ||
| F80/F82 | M10 10.9 | 56 Nm | ||
| 4AZ Additional mass to engine support arm, left | F01/F02/F06/F07/F10/F10 HY/F11/F18/F15/F16/F25/F26/F30/F31/F80/F82/F83 | M8 8.8 | Replace screw | 19 Nm |
| 5AZ Engine support arm to front axle differential (reinforcing plate) | F01.F02, F07/F25, (all-wheel drive vehicle) | M8 | 19 Nm | |
| 6AZ Tank ventilation line to engine support arm | F20/F21/F30/F31/F33/F34/F35 | M6 | 13 Nm | |
| 7AZ Holder, electric vacuum pump to engine support arm | F30Hyb. | 9 Nm |
2211 TIGHTENING TORQUE SPECIFICATION
| Engine mount to engine support arm | |
| M12 | 100 Nm |
ENGINE SUPPORT ARM TO ENGINE - TIGHTENING TORQUE SPECIFICATION
| M10 | 38 Nm |