Crank engine twice (automatic transmission)

Release screws (5) from special tool 2 358 122 and remove the gauges (3) and (4) .

Courtesy of BMW OF NORTH AMERICA, INC.
Remove special tool 2 288 380.

Courtesy of BMW OF NORTH AMERICA, INC.
NOTE:
RISK OF DAMAGE
Damage to the engine.
If the engine is manually rotated in the wrong direction of rotation, the engine can be damaged.
- Only rotate the engine manually in the correct direction of rotation: a) clockwise when looking at the damper, or b) counterclockwise when looking at the chain drive, b) applies only if the timing chain is installed in the rear.
Courtesy of BMW OF NORTH AMERICA, INC.
Turn engine on the vibration damper with special tool 0 493 380 (116 480) twice in direction of engine rotation.
Perform operations "Block crankshaft in TDC firing position of cylinder 1" and "Block camshaft with special tool" as described before.