5413 Soft-Topping Operation, Fully Automatic Technical Data (All X2 Models 2018-2022)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
5413 TECHNICAL DATA OVERVIEW
| Adhesive bead of the side window | ||
| Width a | 8 +3-1 mm | |
| Height b | 12 +1-2 mm | |
| Processing time | max. 7 min | |
| C-nozzle | ||
| For windshields, rear windows, and body-specific side window glass | Diameter A | 7.5 +1-1 min |
| Height B | 13 +1-1 mm | |
| HS-AM multi-base filler VOC | ||
| Layer thickness | 30 μm... 40 μm | |
| Hardening time with infrared | 10 min | |
| Hardening time without infrared 60°C | 30 min | |
| Hardening time without infrared 20°C | 1 Tag | |
| Residual height of the adhesive bead | ||
| Residual height of the adhesive bead | max. 1 mm | |
| Sika primer 206 | ||
| Protrusion of the glass activator track opposite the crimped adhesive bead | 1 mm... 2 mm | |
| Air drying time at over 15°C | 10 min | |
| Air drying time at under 15°C | 30 min | |