1362 SENSOR FOR CONTROL UNIT (X2 xDrive 28i 2018-2023, X2 xDrive 28i 2018-2023)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
1362 TIGHTENING TORQUE OVERVIEW
| Boost pressure sensor to intake plenum | ||
| Torx screw 6x20 | Tightening torque | 5 Nm |
| Hexagon bolt 6x20 | Tightening torque | 8 Nm |
| Boost pressure sensor to throttle body | ||
| TS5x20 | Tightening torque | 5 Nm |
| Coolant temperature sensor at cylinder head | ||
| Sensor | Tightening torque | 18 Nm |
| Crankshaft sensor to timing case cover | ||
| Tightening torque | 4.6 Nm | |
| Differential pressure sensor to holder | ||
| screw | Tightening torque | 4 Nm |
| Hot film air-mass meter to intake filter housing | ||
| TS4x16 | Tightening torque | 1.5 Nm |
| Temperature sensor on the crankcase | ||
| M6x18 | Tightening torque | 8 Nm |