6452 Compressor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
64 52 AIR CONDITIONING COMPRESSOR - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Refrigerant lines to air conditioning compressor | F01/F02/F03/F06/F07/F10/F10h/F11/F12/F13/F15/F25/F39 | M8 | 18 Nm | |
| F10/F11/F15/F16/F18/F20/F21/F22/F25/F26/F30/F31/F32/F33/F34/F35/F36/F80/F82/F83/F87 | M6 | 8 Nm | ||
| N20 F18 | M8x30 | 18 Nm | ||
| 2AZ Oil filler plug, air conditioning compressor | F01/F02/F03/F06/F07/F10/F11/F18/F12/F13/F15/F16/F25/F26/F20/F21/F22/F30/F31/F32/F33/F34/F35/F36/F45/F46/F48/F49/F54/F55/F56/F57/F80/F82/F83/F87/ | 30±1 Nm | ||
| 3AZ Air conditioning compressor on crankcase | N47T, F10/F11/F15/F20/F21/F22/F25/F26/F30/F31/F32/F33/F34/F36 | M10 | 38 Nm | |
| N13, F20/F21/F22/F30/F31 | M8 | 22 Nm | ||
| N20, F07/F10/F11/F18/F20/F21/F22/F25/F26/F30/F31/F33/F34/F32/F35/F36 | M10 | 38 Nm | ||
| N54, F01/F02 | M8 | 19 Nm | ||
| N55, F06/F07/F10/F10h/F11/F15/F16/F18/F12/F13/F20/F21/F22/F26/F25/F30/F31/F32/F33/F34/F35/F36/F87 | M8 | 19 Nm | ||
| N57, F01/F02/F07/F10/F11 | M8 | 19 Nm | ||
| N57, F06/F07/F10/F11/F12/F13/F15/F16/F26/F25/F30/F32/F31/F33/F34/F36 | M10 | 38 Nm | ||
| N63, F01/F02/F03/F04/F06/F07/F10/F11/F12/F13 | M8 | 21±3 Nm | ||
| N63T, F15/F16 | M8 | 24.6 Nm | ||
| N74, F01/F02/F03 | M8 | 21±3 Nm | ||
| F39/F45/F46/F48/F49/F52/F54/F55/F56/F57 all/F60 | M10 | 38 Nm | ||
| B47, F10/F11/F20/F21/F22/F23/F25/F26 | M10 | 38 Nm | ||
| B37, F20/F21 | M10 | 38 Nm | ||
| B48, F30/F31 | M10 | 38 Nm | ||
| B58, F30/F31 | M10 | 38 Nm | ||
| B38, F20/F21/F22/F23/F30/F31 | M10 | 38 Nm | ||
| S55, F80/F82/F83 | M8 | 19 Nm | ||
| S63, F85/F86 | M8 | 24.6 Nm | ||
| N52, F01/F02/F10/F11/F18/F25 | M8 | Replace screws. Torque: Angle of rotation: |
10 Nm 180° |
|
| 4AZ Refrigerant lines to air conditioning compressor | F04 | M6 | 10±2 Nm | |
| F45/F46/F48/F49 | M8 | 19 Nm | ||
| 5AZ Air conditioning compressor holder on crankcase lower section | N55, F20/F21/F22/F23/F30/F32/F31/F33/F35/F36/F87 | 19 Nm | ||
| 6AZ Refrigerant lines to component carrier | F10h | M6 | 8 Nm | |
| 7AZ Holder of refrigerant lines to air conditioning compressor | N57X, F10/F11 | M6 | 8 Nm |
6452 TIGHTENING TORQUE OVERVIEW
| Air conditioning compressor in component carrier | ||
| M10 | tightening torque | 38 Nm |