Remove bearing bracket (automatic transmission)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Remove air duct (1).
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Pull the retaining clip (1) off the brake pedal, detach and pull out retaining bolts (2).
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Loosen nuts (1).
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Disconnect plug connection (1) at the brake light switch.
- Release nut (2) and remove bearing bracket (3).
 Courtesy of BMW OF NORTH AMERICA, INC.
|