Installing the side repeater on the exterior rearview mirror
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Position additional indicator (3) on exterior mirror housing (4).
- Tighten down screw (2)
.TIGHTENING TORQUE SPECIFICATIONS
Exterior mirror to side repeater Screw Tightening torque 1.2 Nm - Connect connectors (1) and lock.
Follow-up work
- Refer to INSTALLING THE MIRROR HOUSING .
- Refer to INSTALLING THE EXTERIOR MIRROR ADJUSTMENT DRIVE .
- Refer to FITTING THE COVER CAP ON THE EXTERIOR MIRROR .
- Refer to INSTALLING THE MIRROR GLASS .