3160 Output Shaft
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
31 60 OUTPUT SHAFT - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
| 1AZ Output shaft bearing to engine block | F39/F45/F46/F48/F49/F52 | M10 | 38 Nm | |
| 2AZ Output shaft to wheel bearing | F39/F45/F46/F48/F49/F52 | M16 | Replace the collar bolt. | |
| Joining torque | 210 Nm | |||
| Angle of rotation | 90° | |||
| 3AZ Support tube on transfer box | F39/F45/F46/F48/F49/F52 | M8x35 | 19 Nm |
3160 TIGHTENING TORQUE OVERVIEW
| Intermediate shaft to transfer box | ||
| M8x35 | tightening torque | 19 Nm |