2710 Transfer Case
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
27 10 TRANSFER BOX IN GENERAL - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Transfer box to transmission/engine | F39 ALL/F45 ALL/F46 ALL/F48 ALL/F49 ALL | M10 | 56 Nm | |
| 2AZ Heat shield to transfer box | F39 ALL/F45 ALL/F46 ALL/F48 ALL/F49 ALL | M6 | 6 Nm | |
| 3AZ Oil filler plug | F39 ALL/F45 ALL/F46 ALL/F48 ALL/F49 ALL | M18x1.5 | 35 Nm |
2710 TIGHTENING TORQUE OVERVIEW
| Brush module lid to housing | ||
| M6 Replace screw. |
Tightening torque | 8 Nm |
| Angle of rotation | 60° | |
| Oil drain plug from oil module | ||
| Tightening torque | 5 Nm | |
| Oil drain plug to oil module | ||
| Tightening torque | 5 Nm | |
| Oil drain plug to transmission | ||
| M16 | Tightening torque | 35 Nm |
| Oil filler plug to transmission | ||
| M22 Replace screw . |
Tightening torque | 60 Nm |
| Undercoating to electric drive unit | ||
| Tightening torque | 8 Nm | |