2611 Propeller Shaft, One-Part Or Multi-Part
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
26 11 PROPELLER SHAFT COMPLETE - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Propeller shaft plugged into transfer box PTO (insert nut) | F39 ALL/F45 ALL/F46 ALL/F48 ALL/F49 ALL | Torque | 80 Nm | |
| 2AZ Rear flexible disc to rear axle final drive | F39 ALL/F45 ALL/F46 ALL/F48 ALL/F49 ALL | Replace screws; joining torque and angle of rotation must be observed without fail. | ||
| Tightening torque Angle of rotation |
55 Nm 90° |
|||
| 3AZ Flexible disc, rear, to propeller shaft | F39 ALL/F45 ALL/F46 ALL/F48 ALL/F49 ALL | Replace screws and nuts; joining torque and angle of rotation must be observed without fail. | ||
| Tightening torque Angle of rotation |
55 Nm 90° |
|||
| 4AZ Center mount to body | F39 ALL/F45 ALL/F46 ALL/F48 ALL/F49 ALL | 19 Nm | ||
| 5AZ Front propeller shaft to rear propeller shaft (flange nut) | F39 ALL/F45 ALL/F46 ALL/F48 ALL/F49 ALL | Replace flange nut, circlip, sealing ring. | 90 Nm | |