2211 Engine Mounting
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
22 11 ENGINE MOUNTING - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Engine mount to cylinder head | F39/F45/F46/F48/F49/F52 | M10 10.9 | Replace screws Tightening torque Angle of rotation |
40 Nm 90° |
| 2AZ Engine mount to side member | F39/F45/F46/F48/F49/F52 | M12 10.9 | 100 Nm | |
| 3AZ Engine mounting bracket to cylinder head | F39/F45/F46/F48/F52 | M10 8.8. | 41 Nm | |
| 4AZ Holder with rubber mount to oil sump | F39/F45/F46/F48/F49/F52 | M12 10.9 | 100 Nm | |
| 5AZ Holder with rubber mount to front axle support | F39/F45/F46/F48/F49/F52 | M12 10.9 | 100 Nm |