Installing air conditioning condenser

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Replace O-rings.
Parts: O-rings
Insert the condenser (3) from the top.
Place refrigerant line (2) on the condenser (3).

Tighten down screw (1).

TIGHTENING TORQUE SPECIFICATIONS

Refrigerant line to air conditioning condenser/bracket
M6	tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

In Version A:
Push the air conditioning condenser (1) downwards and engage the latch mechanisms (2).

Courtesy of BMW OF NORTH AMERICA, INC.
In Version A:
Attach the retaining strap (1).

Engage the hose support (2).

Courtesy of BMW OF NORTH AMERICA, INC.
In Version B:
Push the condenser (1) in direction of arrow and insert with guides (2).

Courtesy of BMW OF NORTH AMERICA, INC.
In Version B:
Slide in the condenser (2) from top downwards.

Ensure that left and right latch mechanisms (1) engage.

Courtesy of BMW OF NORTH AMERICA, INC.
Position refrigerant line (2).

Tighten down screw (1).

TIGHTENING TORQUE SPECIFICATIONS

Refrigerant line to air conditioning condenser/bracket
M6	tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING AIR DUCT TO RADIATOR .
Refer to INSTALLING THE BUMPER CARRIER IN THE FRONT TOP .
Refer to INSTALLING IMPACT ABSORBER .
Refer to INSTALLING BUMPER COVER, FRONT .
Refer to INSTALLING TEMPERATURE SENSOR .
Refer to PARTIALLY INSTALLING FRONT LEFT AND RIGHT WHEEL ARCH COVER .
Refer to PARTIALLY INSTALLING THE WHEEL ARCH TRIM ON THE FRONT LEFT AND RIGHT .
Refer to INSTALLING THE FRONT CENTER HOOD SEAL .
Refer to INSTALLING HOOD SEAL ON LEFT AND RIGHT SIDES .
Refer to CONNECTING THE BATTERY EARTH LEAD .
Refer to EVACUATING AND CHARGING CONDITIONING .