Lubricating the air conditioning compressor (coolant oil level in new air conditioning compressor not known)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
TECHNICAL INFORMATION
The new air conditioning compressor is filled with refrigerant oil at the factory. The coolant oil level in the new air conditioning compressor corresponds to the coolant oil level for the entire new and unfilled refrigerant circuit.
When replacing the air conditioning compressor, it is imperative to adjust the amount of refrigerant oil .
The new air conditioning compressor is filled with refrigerant oil at the factory. The coolant oil level in the new air conditioning compressor corresponds to the coolant oil level for the entire new and unfilled refrigerant circuit.
When replacing the air conditioning compressor, it is imperative to adjust the amount of refrigerant oil .
NOTE:
TECHNICAL INFORMATION
The following procedure only applies if the new air conditioning compressor has a label signaling the coolant oil level.
The following procedure only applies if the new air conditioning compressor has a label signaling the coolant oil level.
- Mechanical air conditioning compressor (removed):
- Open the oil filler plug.
- Drain all the refrigerant oil remaining in the removed air conditioning compressor through the oil filler plug into a measuring cup.
- Turn the belt pulley during draining.
- EKK with an oil filler plug (removed):
- Open the oil filler plug.
- Drain all the refrigerant oil remaining in the removed air conditioning compressor through the oil filler plug into a measuring cup.
- EKK without an oil filler plug (removed):
- Remove the dummy plugs from the high-pressure connection and the low pressure connection.
- Drain all the refrigerant oil remaining in the removed
air conditioning compressor through the high-pressure connection and low pressure connection
into a measuring cup.
- Examine the refrigerant oil drained from the removed air conditioning compressor in the measuring beaker
.
If no refrigerant oil emerges from the removed air conditioning compressor, examine the suctioned refrigerant oil in the collecting vessel of the A/C service station .
- There are no shavings in the drained refrigerant oil.
No additional work necessary.
- There are shavings in the drained refrigerant oil.
In addition to the air conditioning compressor, replace the following parts:
- Air conditioning condenser
- Desiccant insert (if individually exchangeable, if not air conditioning condenser)
- Line to the air conditioning condenser
- Refrigerant oil
- All the expansion valves
- Battery Electric Vehicle, Plug-in Hybrid Electric Vehicle: Also rinse the refrigerant circuit.
- Read the coolant oil level drained from the removed air conditioning compressor on the measuring cup.
- Add 10 ml
to the read-off coolant oil level as a precautionary allowance, but note at least a total of 50 ml
.
Example: 20 ml read at measuring cup: 20 ml + 10 ml precautionary allowance = 30ml < 50ml Coolant oil level to be filled in the new air conditioning compressor = 50 ml - Mechanical air conditioning compressor (new):
- Open the oil filler plug.
- Drain all the refrigerant oil from the new air conditioning compressor into a clean collecting vessel.
- Turn the belt pulley during draining.
- EKK with an oil filler plug (new):
- Open the oil filler plug.
- Drain all the refrigerant oil from the new air conditioning compressor into a clean collecting vessel.
- EKK without an oil filler plug (new):
- Remove the dummy plugs from the high-pressure connection and the low pressure connection.
- Drain the full amount of refrigerant oil from the new
air conditioning compressor into a clean
collecting vessel via the high-pressure connection and low pressure connection
.
- Immediately after draining, pour the amount of refrigerant oil to be filled from the collecting vessel into a clean measuring cup.
- Mechanical air conditioning compressor and EKK with an oil filler plug (new):
- Pour coolant oil level to be filled from the measuring cup into the new air conditioning compressor through the oil filler plug.
- Replace the sealing ring.
- Tighten oil filler plug.
- EKK without an oil filler plug (new):
- Pour the amount of refrigerant oil to be filled from the measuring cup into the new air conditioning compressor via the low pressure connection .
- Seal the high-pressure connection and low pressure connection with a dummy plug.
- Immediately after draining, the remaining new refrigerant oil must be filled into the A/C service station expansion tank.
- The remaining, new refrigerant oil must be disposed of correctly if it is not immediately filled into the expansion tank of the A/C service station.
- Refrigerant oil drained from the removed air conditioning compressor must not be reused and must be disposed of correctly
.