Installing right mixed air flap motor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Correctly position the mixed air flap motor (3) .

Tighten down screws (2) .

TIGHTENING TORQUE SPECIFICATIONS

Heater/air conditioner
Screw	tightening torque	1.2 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Connect connectors (1) and lock.

Follow-up work

Refer to INSTALLING THE SIDE TRIM PANEL FOR THE RIGHT CENTER CONSOLE .
Refer to ADDRESSING THE CONTROLLER DRIVE .