Replacing fresh air/recirculated air flap motor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen screw (1),
- Unlock the detents (2).
- Release the fresh air/recirculated air flap motor (3) from the holder.
- Replace the fresh air/recirculated air flap motor (3).
Parts: Fresh air/recirculated air flap motor
- Position the fresh air/recirculated air flap motor (3) on the holder.
- Lock the detents (2).
- Tighten down screw (1).TIGHTENING TORQUE SPECIFICATIONS
Heater/air conditioner Screw tightening torque 1.2 Nm