Installing controller for the blower
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Thread in and install controller (3).
- Connect connectors (2) and lock.
- Tighten down screws (1).TIGHTENING TORQUE SPECIFICATIONS
Heater/air conditioner Screw tightening torque 1.2 Nm
Follow-up work
- Refer to INSTALLING THE LEFT FOOTWELL VENTILATION DUCT .
- Refer to CONNECTING THE BATTERY EARTH LEAD .