Install the control unit for the controller of the Touchbox (TBX)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Replace screws (1) .
Parts: Screws
Position control unit (3) .

Tighten the screws (1) .

TIGHTENING TORQUE SPECIFICATIONS

Touchbox (TBX) control unit
Screw	Tightening torque	3.3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Connect connector (2) .

Follow-up work

Refer to INSTALLING THE BOTTOM C-PILLAR TRIM PANEL .
Refer to INSTALLING THE REAR DOOR SILL COVER STRIP .
Refer to ENCODING/PROGRAMING CONTROL UNIT(S) .