Install the Head Unit High (HU-H)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: RISK OF DAMAGE
Electrostatic discharge .
Damage to or destruction of electrical components .

Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
Read and comply with user information on using the associated special tool 12 7 060.
Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
For additional information see: NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

Position head unit (1) .
Connect and lock all connectors in the marked area.

Courtesy of BMW OF NORTH AMERICA, INC.
Slide in the head unit (2) correctly.

Tighten the screws (1) .

TIGHTENING TORQUE SPECIFICATIONS

Head unit to dashboard
screw	Tightening torque	1.8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Route the wiring harness (1) correctly,

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING AUDIO OPERATING UNIT AND AIR CONDITIONING CONTROL PANEL .
Refer to INSTALLING CENTER CONSOLE, COMPLETE .
Refer to INSTALLING THE FRONT STORAGE COMPARTMENT .
Refer to INSTALLING THE CENTER CONSOLE TRIM .
Refer to INSTALLING THE DECORATIVE TRIM TO THE CENTER CONSOLE .
Refer to INSTALLING THE GEARSHIFT LEVER COVER .
Refer to INSTALLING THE REAR CENTER CONSOLE TRIM .
Refer to INSTALLING SIDE TRIM PANEL FOR THE LEFT AND RIGHT CENTER CONSOLE .
Refer to INSTALLING THE BOTTOM RIGHT INSTRUMENT PANEL TRIM .
Refer to CONNECTING THE BATTERY EARTH LEAD .
Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .
Refer to ENCODING/PROGRAMING CONTROL UNIT(S) .