Installing the rear panel on the rear seat backrest in the center

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Ensure that the rear panel engages noticeably in the backrest frame (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Feed the rear panel (1) into the rear seat backrest.

Courtesy of BMW OF NORTH AMERICA, INC.
Feed in edge stripping of the backrest cover (1) beginning from the top.

Courtesy of BMW OF NORTH AMERICA, INC.
Attach the backrest cover (1) in the direction of the arrow.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the backrest cover and close the hook and loop fastener (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Press the edge stripping from the backrest cover (1) into the frame at the marked area.

Courtesy of BMW OF NORTH AMERICA, INC.