Removing the backrest width adjustment with valve
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the cable ties in the highlighted areas.
- Unlock and disconnect plug connections (1) .
- Detach the valve unit (2) from the spring wire.
- Feed out the pump (3)
.
- Release the screws (1)
on the left and right air cushion (2)
.NOTE: Perform the steps on the left and right side.
- Detach the spring wire (1) from the backrest frame.
- Feed out the air cushion (2)
towards the rear.