Installing the thigh support on the front seat

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Version with seat heating only:
Connect plug connection (1) and lock.
Position the thigh support (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Insert thigh support (1) with the guides (2) into the corresponding openings on the seat frame (3).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
Microencapsulated screws must be replaced and may not be reused.
The screw lining must be completed within 10 minutes, as the hardening begins after this time period. Microencapsulated screws must not be retightened.

Courtesy of BMW OF NORTH AMERICA, INC.
Tighten down screws (1).
Adjust thigh support (1) towards the front.
Hook the edge stripping (2) of the seat cover into the holder (3).

Courtesy of BMW OF NORTH AMERICA, INC.