Removing the front crankshaft seal
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Drive in the crankshaft seal (1)
in the marked area with a punch to approx. 1 cm deep.
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Lever out the crankshaft seal (1)
with a suitable tool.
- Make sure that the sealing surface on the engine block is not scratched.
 Courtesy of BMW OF NORTH AMERICA, INC.
|