Replacing front left or right spring strut support bearing (X2 2018-2023)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Support bearings with 5-hole screw connection (see graphic) are fitted in motor vehicles from 01/2015.
In motor vehicles up to 01/2015 (support bearings with 3-hole screw connection), in case of replacement, a support bearing matching the new version (5-hole version) can be used, but using only 3 screws.
In motor vehicles up to 01/2015 (support bearings with 3-hole screw connection), in case of replacement, a support bearing matching the new version (5-hole version) can be used, but using only 3 screws.
NOTE:
Procedure is described in the service information "Replacing front left or front right spring strut shock absorber. Refer to REPLACING FRONT SPRING STRUT SHOCK ABSORBER ON RIGHT OR LEFT ".