Removing pressure pipe between throttle body and charge air cooler
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work
- Refer to REMOVING THE INTAKE MANIFOLD FOR INTAKE SILENCER HOUSING .
- Refer to REMOVING INTAKE SILENCER HOUSING .
- Refer to REMOVING THE FRONT UNDERBODY PROTECTION .
WARNING:
Hot surfaces
.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
- Unlock lock (1).
The locking mechanism (1) must engage in the holder (arrow).
- Unlock and disengage lock mechanisms (1) on both sides.
- Guide out the pressure pipe (2) in direction of arrow and set it aside.
- Unlock and disengage lock mechanisms (1) on both sides.
- Guide out the pressure pipe (2) in direction of arrow and set it aside.
- Slide out pressure pipe (1) in arrow direction and remove.NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
- Lock the opening (1) of the charge air cooler with a suitable auxiliary material.