Remove Cover Housing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Loosen the sealing lip (1) from the wheel arch.

Courtesy of BMW OF NORTH AMERICA, INC.
Pierce the cover housing (1) in the highlighted areas (2) using a small screwdriver.

Courtesy of BMW OF NORTH AMERICA, INC.
Hold cover bowl under tension.
Insert the screwdriver no more than 10 mm deep.
Unlock the latch mechanisms (6) in a sequence from (1) to (4) using a screwdriver (5).

Courtesy of BMW OF NORTH AMERICA, INC.
Turn and remove the cover housing from the side panel.

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock plug connection (1) and disconnect.
Close fuel filler flap.
Remove the cover housing.

Courtesy of BMW OF NORTH AMERICA, INC.