Partially Installing The Fuel Filler Pipe
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Position the fuel filler pipe (4).
- Tighten nut (3).
Parts: Nut.
TIGHTENING TORQUE SPECIFICATIONSFuel filler pipe to outer wheel arch section Nut M6 8 Nm - Tighten nut (2).
Parts: Nut.
TIGHTENING TORQUE SPECIFICATIONSFuel filler pipe to body Plastic nut Renew plastic nut. tightening torque 4 Nm - Clip the tank ventilation line (1) into the holder,
- Close sealing cap (1).
- Insert the retaining strap (2).
Follow-up work
- Refer to INSTALL THE FILLER TUBE ON THE ACTIVE TANK .
- Refer to INSTALL THE FUEL FILLER FLAP .
- Refer to INSTALLING THE REAR WHEEL ARCH COVER ON THE RIGHT .
- Refer to INSTALLING THE RIGHT REAR WHEEL .
- Refer to RESETTING THE TIRE PRESSURE MONITOR .