Adjusting Tailgate
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Shutting hood or trunk lid
.
Injury hazard!
Injury hazard!
- Support hood/trunk lid in fully open position with the aid of a suitable device.
NOTE:
TECHNICAL INFORMATION
Notes for the gap dimensions of the body form the basis of this REP and it is mandatory to observe them.
For additional information see: 41 00... Gap dimensions for body
Notes for the gap dimensions of the body form the basis of this REP and it is mandatory to observe them.
For additional information see: 41 00... Gap dimensions for body
NOTE:
Perform the steps on the right and left side.
- Undo screws (1) until the tailgate can be moved.
- Move the tailgate lengthwise and laterally until the tailgate has reached the specified gap dimension to the side panel.
- Tighten the screws (1).TIGHTENING TORQUE SPECIFICATIONS
Trunk lid to the hinge Hexagon screw M8 Tightening torque 28 Nm Check
- Check the gap dimensions (arrows) between tailgate and side panels.
Result
» Gap dimensions do not correspond to the specifications.
Measure
- Adjust tailgate.