Installing Engine Support In Front Of Bulkhead With Wheel Arch

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Install new part engine support inner section with alignment bracket or universal fixture and weld in areas (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Weld the new part engine support inner section in the areas (1) and (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Install new part spring support with alignment bracket or universal fixture and weld in areas (1) and (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Weld the new parts in areas (1) and (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Weld the new parts in areas (1) and (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Weld new part in the areas (1) to (4).

Courtesy of BMW OF NORTH AMERICA, INC.
Weld new part in the areas (1) to (3).
Weld all 3 panels together in areas (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Weld new part in the area (2).
NOTE: TECHNICAL INFORMATION
For additional information see: 41 00... Installation of a cavity sealing (not expanding)
Apply sealant to cavity sealing (1). Install cavity sealing.

Courtesy of BMW OF NORTH AMERICA, INC.
Apply sealant to cavity sealing (3).
Install new part and weld in the areas (1) and (2).

Courtesy of BMW OF NORTH AMERICA, INC.