Version A: Removing the washer fluid reservoir
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING ALL WHEELS .
- Refer to PARTIALLY REMOVING THE FRONT WHEEL ARCH COVER .
- Detach the filler hose (1).
- Detach air bleeder hose (2).
- Unclip connector (3) from washer fluid reservoir for washer system.
- Unclip hose pipe (4) on washer fluid reservoir for washer system.
- Catch the escaping washer fluid.
- Unlock and disconnect connector (1) on the washer fluid level switch.
- Unclip hose pipe (2) on washer fluid reservoir for washer system.
- Unlock and disconnect connector (3) on the windshield washer pump.
- Unlock and disconnect hose pipes (4) from the windshield washer pump.
- Loosen screws (1).
- Feed washer fluid reservoir (2) out of the mount for the washer fluid reservoir (3) and remove.