Version A: Installing washer fluid reservoir
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Thread the washer fluid reservoir (2) into the fixture for the washer fluid reservoir (3),
- Tighten down screws (1),TIGHTENING TORQUE SPECIFICATIONS
Washer fluid reservoir to body M6x20 screw Tightening torque 11.8 Nm - Connect and lock the hose pipes (4) to the windshield washer pump.
- Connect connector (3) to the windshield washer pump.
- Clip in hose pipe (2) at the washer fluid reservoir for the washer system,
- Connect the connector (1) to the washer fluid level switch,
- Clip hose pipe (4) into the washer fluid reservoir for the washer system.
- Clip connector (3) into the washer fluid reservoir for the washer system,
- Join the air bleeder hose (2).
- Join the filler hose (1).
Follow-up work
- Refer to PARTIALLY INSTALLING THE FRONT WHEEL ARCH COVER .
- Refer to INSTALLING ALL WHEELS .