Overview of additional work for the removal and installation or replacement of electronic components in the body area/windshield (X2 2018-2023)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
| Component | Removal and installation Calibration/Initialization required (diagnostic system must be connected) | Removal and installation Use of the Special tool necessary | Replacement Programming/coding Calibration/Initialization required (diagnostic system must be connected) | Replacement Use of the Special tool necessary | Remarks |
|---|---|---|---|---|---|
| Front section: (including bumper cover) |
|||||
| Park Distance Control ultrasonic sensor | No | No | No | No | |
| Parking Maneuvering Assistant ultrasonic sensor | No | No | No | No | |
| Active pedestrian protection sensor | No | No | No | No | Must be replaced after the active pedestrian protection has been activated! Impact absorber must also be replaced! |
| Active pedestrian protection actuator | No | No | No | No | Must be replaced after the active pedestrian protection has been activated! |
| Rear area: (including bumper cover): |
|||||
| Rear view camera | No | No | Yes | No | |
| Park Distance Control ultrasonic sensor | No | No | No | No | |
| Windshield: | |||||
| KAFAS camera | no* | No | no* | No | *Necessary after replacement of the windshield |
| Camera-based driver support systems camera (F60 only) Rain sensor (separate document) | no* | No | Yes | No | *Necessary after replacement of the windshield |