Install driving light sensor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Thread in the driving light sensor (1) in direction of arrow into the holder (2).
- Press on the driving light sensor (2) on the retaining spring (3) in the center.
- Successively press down the retaining springs (4) on each side to lock it.
- Connect connector (1).
- Check if air pockets are visible.
Visible shades (1) and (2) are not air pockets but rather the optical element of the sensor. The shades do not represent any functional limitation.
Follow-up work
- Refer to INSTALLING THE INTERIOR MIRROR .
- Refer to INSTALLING THE COVER ON THE INSIDE MIRROR .