Removing the steering column switch cluster (SZL)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Pyrotechnic components .
Danger! Immobilization period-threatening injuries!

All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
Replace any damaged part or ones that have been dropped.
For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .

NOTE: TECHNICAL INFORMATION
Wheel alignment is not necessary after removal, installation or replacement.

Preliminary work

Refer to DISCONNECTING THE NEGATIVE BATTERY CABLE OF THE SYSTEM BATTERY .
Refer to REMOVING AIRBAG UNIT OF THE STEERING WHEEL/SPORTS STEERING WHEEL .
Refer to REMOVING STEERING WHEEL/SPORTS STEERING WHEEL .
Refer to REMOVING STEERING COLUMN SHROUD UPPER SECTION .
Refer to REMOVING STEERING COLUMN SHROUD LOWER SECTION .

Loosen screws (1).
Remove the steering column switch cluster (SZL) (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock and disconnect connector (1) on the steering column switch cluster (SZL) (2).

Courtesy of BMW OF NORTH AMERICA, INC.