Control unit plugs, 25-, 35-, 55-, 83-, 88-pin (X2 2018-2023)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- Refer to 61 0 312
- Refer to 61 0 314
- Refer to 61 0 315
- Refer to 61 0 323
Unscrew the screws (1).
Lever out pin sensor (2) with gasket (3) in arrow direction.
Remove gasket (3).
Pull out housing lock (4) in arrow direction and unlock.
Press down snap-in hooks (5) of corresponding contact and pull out cable with contact.
Special tool 61 0 312 (61 1 134) for mini flat spring contacts.
Special tool 61 0 314 (61 1 135) for mini flat spring contacts.
Special tool 61 0 315 (61 1 151) for double flat spring contacts (dual snap-in hooks).
Special tool 61 0 323 (61 1 152) for double flat spring contacts (special snap-in hooks).