Circular connector, 13-pin, system D2.5 (X2 2018-2023)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- Refer to 61 0 303 .
Detach rubber grommet (1).
Carefully pull out locking mechanism (2) in arrow direction.
Shift lower section of connector (3) in arrow direction until retaining lugs (4) snap into release groove (5).
With special tool 61 0 303 , press down retaining lugs (6) of corresponding contact and pull out cable.