Install the bottom cross connection
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Guide in cross connection (3) and install.
- Guide in locks (2) and install.
- Lock the locking pins (1).
- Ensure that the locking pins (1) audibly engage.
- Tighten the bolts (2) at the front left.TIGHTENING TORQUE SPECIFICATIONS
Deformation element to front axle support adapter screw Tightening torque 11.8 Nm - Replace the blind rivet (1).
Parts: Blind rivet
- Mount the blind rivet (1) with blind rivet pliers.
- Tighten the bolts (2) at the front right.TIGHTENING TORQUE SPECIFICATIONS
Deformation element to front axle support adapter screw Tightening torque 11.8 Nm - Replace the blind rivet (1).
Parts: Blind rivet
- Mount the blind rivet (1) with blind rivet pliers.