Installing the connecting support on the tunnel at front and rear
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Insert and install connecting supports (2) .
- Tighten screws (arrows) of the connecting support (2)
.TIGHTENING TORQUE SPECIFICATIONS
Front connecting support on body M10x18 tightening torque 56 Nm - Insert and install connecting supports (1) .
- Tighten screws (arrows) of the connecting support (1) .
TIGHTENING TORQUE SPECIFICATIONS
| Rear connecting support on body | ||
|---|---|---|
| M8x18 | tightening torque | 28 Nm |