Install right rear suspension cross-brace
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
TECHNICAL INFORMATION
Driving without the strut brace/front-end strut or tension strut is not permitted.
Driving without the strut brace/front-end strut or tension strut is not permitted.
- (1) Fit and install rear right strut brace.
- Replace nut (3)
.
Parts: Nut
- Tighten nut (3)
.TIGHTENING TORQUE SPECIFICATIONS
Cross-brace to firewall M10
Replace nut.tightening torque 56 Nm Angle of rotation 45° - Replace the screw (2)
.
Parts: Screw
- Tighten down screw (2) .
TIGHTENING TORQUE SPECIFICATIONS
| Strut brace to support bearing | ||
|---|---|---|
| M10 Replace screw. |
tightening torque | 56 Nm |
| Angle of rotation | 90° | |