Disconnecting the bleeder unit for the brake fluid (after repair)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: RISK OF DAMAGE
Paint damage .
Mechanical or chemical action may lead to paint damage .

Cover up working area with specified covering material only.

Switch off bleeder unit (1) and remove it from the brake fluid expansion tank.
Check the brake fluid level and adjust it to the maximum mark if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Check the seal (1) on the sealing cap for damage and replace if necessary.
Mount the sealing cap on the brake fluid expansion tank.

Courtesy of BMW OF NORTH AMERICA, INC.