Disconnecting plug connections from steering gear
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
If installed: Detach connectors from the front axle carrier
- Release the plug connection (1) from the front axle support (2) .
- Loosen screw (3) .
- Release the plug connection (4) from the front axle support (2) .
- Disconnect wiring harness (1)
from steering gear.
- To unlock the plug connections (see the following work step): unlock plug connections (arrow) with the right hand.
The plug connections can be reached via the left-hand output shaft.
- Unlock plug connections (arrow) (1) and disconnect from the steering gear.
- Make sure when lowering the front axle that the cables are not damaged!