Install the seal mount for the right-hand front flap

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Description is for left component only. Procedure on the right side is identical.

Installing seal fixture for hood

Position mounting (3) of the hood seal.
Secure expanding rivet (2).

Tighten down screw (1).

TIGHTENING TORQUE SPECIFICATIONS

Fixture for hood seal to second rear firewall upper part
Thermoplastic hexagon screw	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING FRONT WINDSHIELD PANEL COVER .
Refer to INSTALLING THE REAR HOOD SEAL .