Removing sound insulation on front door
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING COVER ON DOOR HANDLE .
- Refer to REMOVING FRONT DOOR TRIM PANEL .
NOTE:
TECHNICAL INFORMATION
Notes on the sound insulation must be strictly observed for these repair instructions.
For additional information see: NOTES FOR BONDING SOUND INSULATION (SI), DOORS .
Notes on the sound insulation must be strictly observed for these repair instructions.
For additional information see: NOTES FOR BONDING SOUND INSULATION (SI), DOORS .
- Position of sealing bead (1)
- Pay attention to the cable (2) when removing the sound insulation (3).
- When cutting through the sealing bead (1) make sure not to damage the sound insulation (2) and any potentially routed cables.
- Use a suitable, sharp cutting tool (3) to cut through the sealing bead (1) of the sound insulation (2) in the corresponding area.