Installing the rear wheel speed sensor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Install the wheel speed sensor (3).
- Replace the screw (2).
Parts: Screw.
- Position and tighten the screw (2).
TIGHTENING TORQUE SPECIFICATIONS
| Rear wheel speed sensor on wheel carrier | ||
| Replace screw. | tightening torque | 12 Nm |
- Install the cable (1) in the holder.
- Connect connectors (1) and lock.
- Hook the cable of the wheel speed sensor into the holders (2).
Follow-up work
- Refer to INSTALLING THE RIGHT REAR WHEEL .