Remount hydraulic unit holder
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Release screws (1)
and remove the holder (2)
.
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Install holder (2)
.
- Replace screws 1.
Parts:
Screws
- Insert screws (1)
and tighten.
TIGHTENING TORQUE SPECIFICATIONS
| Hydraulic control unit to holder |
M6
Replace screws. |
Tightening torque |
8 Nm |
Courtesy of BMW OF NORTH AMERICA, INC.
|